Model CNET‑E02 radar is a low‑altitude warning and reconnaissance device. Operating in the Ku‑band, it adopts a linear frequency‑modulated pulse system with a wide‑angle frequency‑scanning waveguide antenna. Azimuth mechanical scanning is suitable for application scenarios requiring full‑azimuth coverage by a single radar. Frequency‑scanning technology is employed in the elevation dimension to replace costly phased‑array scanning technology, delivering high cost‑performance.
Technical Specifications
Parameter | Specification |
Operating Frequency Band | Ku-band; 6 optional frequency points |
Technical Architecture | Digital Beam Forming (DBF) with simultaneous multi-beam in elevation and mechanical scanning in azimuth |
Beam Coverage | Elevation: 0~45°Azimuth: 360°Scanning Radius: ≥4kmAltitude Coverage: ≥500m |
Detection Range | ≥2Km (for Phantom 4 UAV and birds with wingspan＞1m, RCS=0.01㎡)≥3.5Km (for medium and large fixed-wing aircraft) |
Angle Measurement Accuracy | Horizontal: ≤0.4°(RMS)Elevation: ≤0.6°(RMS) |
Ranging Accuracy | ≤5m (RMS) |
Blind Zone | ≤50m |
Data Refresh Rate | 30RPM (full-power detection) |
Simultaneous Target Processing Capacity | ≥100 batches |
Applicable Target Speed | 1~100m/s |
False Alarm Performance | No false alarms triggered by general meteorological phenomena (tree swaying, rain and snow), sea conditions below level 3, and cyclic activities such as small road wind turbines |
Overall Power Consumption | ≤180W (with portable turntable) |
Operating Voltage | DC 30~52V/AC 220V |
Data Interface | Gigabit Ethernet |
Operating Temperature | -40~+55℃ |
Protection Grade | IP65 |
Overall Weight | ≤24Kg (including portable turntable) |
Host Dimensions | 450mm×380mm×75mm |
Warranty Period | 2 years |
